Bis(3-dimethylaminopropyl)-n,ndimethylpropanediami GENERAL DESCRIPTIONJD C9 catalyst is a clear tertiary amine liquid with a slight amine odor. The material will darken on standing with no effect on r
Dimethylaminomethylphenol JD DMP-10 curing agent is a technical grade of dimethylaminomethylphenol. It is similar to JD K54 curing agent in its behavior as a catalyst, but is
1,2-Cyclohexanediamine Appearance colorless-to straw liquid Melting point 2-15°C Boiling point 188-192°C Flash point 75°C Specific gravity(25°C) 0.931 Refra
N-(3-Aminopropyl)imdazole JD API is a PU catalysts
N-(2-Hydroxypropyl)imidiazole PU catalyst
Potassium Acetate KAC catalyst is a potassium-based catalyst that is widely used in the production of polyisocyanurate foams. Specifications: 1) 40% potassium acetate
N-(2-Hydroxyethyl)imidiazole PU catalyst
JD EG catalyst JD EG catalyst is a liquid mixture of 33% triethylenediamine (TEDA) and 67% monoethylene glycol (MEG). It is used as a standard catalyst in microcell
JD S-25 JD S-25 catalyst is primarily used in microcellular polyurethane formulations extended with 1,4-butanediol. It can also be used in other types of pol
JD BL-17 JD BL-17 catalyst is suited for all types of flexible foam. It is chemically blocked to reduce its catalytic effect during the early stages of the po
JD 8154 catalyst JD 8154 is a delayed-action catalyst for use in polyurethane foams. It was designed for use in formulations requiring a delayed initiation time and i
JD 33-LV catalyst JD 33-LV catalyst is a solution of 33% triethylenediamine and 67% dipropylene glycol. It is completely soluble in water and is miscible with polyols,
Tetramethylpropylenediamine TMPDA catalyst is a highly active, pure liquid tertiary amine that is suitable for use as a blowing catalyst in a number of rigid polyurethane foam a
Tetramethyl-1, 6-Hexanediamine Tetramethyl-1, 6-hexanediamine is a colorless liquid, free of suspended matter. It is miscible with water and almost all common organic solvents. Spe
N, N-Dimethyl-1, 3-Propanediamine N, N-DIMETHYL-1, 3-PROPANEDIAMINE (DMAPA) is a clear essentially colorless liquid with a typical amine odor. It is completely soluble in water, benze
Potassium Octoate JD K15 catalyst is a potassium-based catalyst that is widely used in the production of rigid isocyanurate foams. Specifications: 1) 75% potassium o
TRIS (DIMETHYLAMINOMETHYL) PHENOL JD DMP-30 is a catalyst for rigid polyisocyanurate foams. JD DMP-30 is an additive for epoxy resine. Appearance: Clear, Light Yellow Liquid Sales Spe
N, N-Dimethylbenzylamine Specifications: 1) Miscible with alcohol chloroform, ether, and oils 2) Appearance: colorless liquid with ammonia-like odor 3) Sales content: 99% mi
Bis (dimethylaminopropyl) methylamine JD 77 is a tertiary amine catalyst (pentamethyldipropylenetriamine) that finds widespread use in all types of polyurethane foam. It provides nearly b
Dimethylaminopropylhexahydrotriazine JD-10 catalyst is a strongly basic, colorless-to-straw-yellow colored liquid. The material has a characteristic but low amine odor. It is soluble i
2, 2-Dimorpholinodiethylether JD DMDEE catalyst is an amine blowing catalyst particularly suitable for one- and two-component rigid foam sealant systems as well as for flexible sl
Bis (2-dimethylaminoethyl) ether (99%) JD BDMAEE catalyst is one of the most active amine blowing catalysts available. Appearance:Amber to Colorless Liquid Sales specification99% min. Fla
N,N,N',N',N"-PENTAMETHYLDIETHYLENETRI PMDETA catalyst is a highly active, pure liquid tertiary amine that is suitable for use as a blowing catalyst in a number of rigid and flexible polyu
N, N-Dimethylcyclohexylamine Specifications: 1) Appearance: colorless-to-straw liquid 2) Sales content: 99% min. 3) Water content: 0.25% max. 4) Flash point: 40oC 5) Specific gr
